Vaporesso XROS 16W Spec:
- Dimensions: 112mm (h) x 23mm (w) x 13mm (d)
- Battery: Integrated 800mAh
- Output power: 11W/16W
- Charging: Type-C, 5V/1A
- Airflow: Adjustable Airflow Control Switch
- Cartridge capacity: 2mL
- Filling: Clamshell Top Fill
- Cartridge resistance:
- 1.2 Ohm Mesh POD (MTL)
- 0.8 Ohm Mesh POD (DTL)
- Protection features:
- Over Voltage
- Low Voltage
- No Load
- Colors: Blue, Matte Gray, Rainbow, Rose Pink, Sky Blue, Silver
- Disposable Transparent Design
- High Quality PCTC Plastic Construction
- Dual Airflow Slots
- Bottom Adjustable Airflow Control Valve
- Dimensions: 1-15/16" x 7/8" (Including Drip Tip and Threads)
- Diameter: 24mm
- 510 Threaded
- E-Liquid Capacity: 5.5ml
- Top Slide Fill Design with Silicone Seal
- Advanced Leak Resistant Design
- Kanthal Mesh Coil with Wood Pulp/Cotton Wick for Flavor Boost
- Utilizes Plex3D Matrix Mesh Coil 0.19ohm Atomizer Head (60 - 80W)
- 2-pack of empty pods (Vapor Modules) for the Boulder Rock E-Cigarette
- Compatible with the Boulder Rock only
- 1.5ml e-liquid capacity
- AIO Design
- Plug-and-Play system
- 2mL eliquid Capacity
- Integrated 950mAh High-Drain Lithium Battery
- Voltage Output Range: 3.0-4.2V
- Maximum Current: 15A
- Voltage-Based Output
- Draw-Activated Firing Mechanism
- 3-Color LED Light Battery Indicator
- Mi-Pod Refillable/Replaceable Catridge System – 2mL
- Catridge Resistance Value – 1.0ohm
- OAS System – Oil & Air Separated
- Stealth Mode
- 10 Seconds Cut-Off
- Over Heat Protection
- Short Circuit Protection
- Low Voltage Protection
- Low Resistance Protection
- MicroUSB Charging Port
- Dimensions: 95x30.5x20mm
- Battery: 1500mAh Integrated
- Wattage: 1-40W
- 0.5V-4.0V Voltage Output
- 0.3-3.0ohm Resistance Range
- 4.5mL Nord Pod - Supports Nord Coils
- 4.5mL RPM Pod - Supports RPM Coils
- Ergonomic Mouthpiece
- Single Button Operation - Firing & Wattage Adjustment
- Screen: 0.69" OLED
- Side Fill System with Silicone Stopper
- SMOK Nord & RPM Coil Compatible
- 0.4ohm RPM Mesh Coil
- 0.8ohm Nord DC MTL Coil
- Plug 'n' Play Coil Installation
- Proprietary Intelligent Chipset
- Magnetic Pod Connection
- Intelligent Pod Detection
- Protection for: Short-Circuit, 8 Seconds Cut-Off and Low Voltage
- MicroUSB Port
- Zinc-Alloy Construction
VAPORESSO XROS 16W POD SYSTEM
VAPORESSO XROS 16W POD SYSTEM XROS 16W is the ultimate stress free, mess free pod vape. Featuring a dual firing mechanism you can either use draw activation or firing key. The integrated 800mAh battery is charged via 1A Type-C and is fully charged in just 45 minutes. Inside the XROS is the famous Vaporesso AXON chipset which provides an entire suite of protection features for your safety, which includes intelligent pod recognition. On the back of the XROS is a neat adjustable airflow switch so that you can easily dial in the perfect vape for your taste. Vaporesso XROS has a SUS304 stainless steel coating which is corrosion resistant, super durable and silky smooth texture.
The technological advances don’t stop on the XROS pod. The mouthpiece pops off in a clever clamshell design to reveal a large fill slot on the top of the pod, meaning you don’t have to remove the pod to refill. Super easy and mess free. Made from strong and eco friendly PCTG the pod is totally transparent and offers a 360 degree viewing window to monitor vape juice levels.
At the base of the coil inside the pod are quadruple silicone layers which have been fitted with ultrasonic sealing to improve air-tightness. A silicone stopper in the mouthpiece not only seals the pod to avoid leaking it also balances the air pressure of the chamber. In the Vaporesso XROS kit come two pods. A 1.2 Ohm Mesh Pod designed for MTL vaping and a 0.8 Ohm Mesh Pod for restricted DTL.
|The GoMAX Disposable Sub-Ohm Tank by Innokin is one of the industry's leading disposable tanks.
It has a 510 threaded connection which makes it versatile and able to be used with many batteries. There is also a dual slotted airflow control ring. This ring allows you to regulate how much air intake happens when you inhale. This affects the flavor and quality of your vapor production. More airflow equals more clouds, less airflow equals more flavor.
It can hold up to 5.5ml of e-liquid and is constructed of PCTG plastic. It uses a non-removable 0.16ohm mesh atomizer coil that has notches to increase the surface area of the heating element.
It is easy to fill this tank, simply slide the top to reveal a large fill port.|
ABOUT THE VAPOR MODULE POD PACK
Refresh your E-Cigarette with some fresh pods. To fill, simply insert the nozzle of your bottle of e-liquid a short way into the refilling port found on the bottom of the pod and gently squeeze until full. (see diagram below).
|Mi-Pod Pod System Starter Kit
The Mi-Pod Pod System Starter Kit presents the second generation of the AIO (all-in-one) portable kit from Smoking Vapor, delivering a custo integrated 950mAh rechargeable battery paired with patented OAS system and a refillable pod system.
Similar to the dependability of the original Mi-One Kit, the Mi-Pod Starter Kit delivers a compact device with emphasis on balancing performance, size, and functionality.
The Mi-Pod Kit features a refillable pod-based system, which can hold up to 2mL of today’s popular Nicotine Salt E-Liquids.
The internal 1.0ohm atomizer section implements a patented OAS System (Oil and Air Separated), with top airflow and a leak-proof design.
In terms of performance, the Mi-Pod integrates an impressive 950mAh lithium battery and is completely auto draw-activated for a convenient and easy vape experience. A Tri-colored LED light helps indicate battery life with a Stealth Mode mechanism for discrete use.||
YOUR LUXURY VAPING EXPERIENCE
The Up-graded Vaping Beast
Giving Extra Throughout
Powerful All the Time
SMOK Nord 2
Nord 2 by SMOK might look identical to the original Nord device but that's where the similarities stop!
The original was one of the most popular pod systems in 2019 and here in 2020 the SMOK Nord 2 looks set to take the world by storm. With massive upgrades in every department Nord 2 is the future of pod vaping.
Under the familiar chassis is an integrated 1500mAh battery which is 400mAh more than the Nord in capacity but a huge increase in power from 15W to 40W max, which rivals both the RPM40 and Fetch Mini kits from SMOK!
The Nord 2 keeps its simplicity in design with a single firing button but upgraded with a 0.69" OLED screen that displays the variable wattage setting, the Ohm reading, voltage setting and battery life.
To activate the device it's the familiar five clicks and hold down to vape, but with this edition, you can adjust the wattage by pressing the button three times, then hold down to cycle through the numbers until you reach the wattage you prefer. Once you have your wattage, simply release your finger and your setting will be confirmed by flashing twice.
The airflow is situated in the same position as the Nord but with larger openings to cater for the increased power output. Another simple but effective adjustment is the pod connection mechanism which now clips into place rather than the old magnetic version, making it feel sturdy and snug.
Each kit includes two pods. An RPM Pod (RPM 0.4Ohm Mesh Coil preinstalled) which is compatible with the RPM coil range and a Nord Pod (Nord Dual 0.8Ohm MTL Coil preinstalled) compatible the replacement Nord coil. That's 12 coil options to choose from and includes the RPM RBA coils for DIY vaping.
With the usual curved mouthpiece, Nord 2 is no different from its predecessors like the Novo, but the Nord 2 comes complete with an increased pod cartridge capacity of 4.5ml making it, even more, user-friendly. It also utilizes the Nord and RPM coils which we've come to know and love for their flavor and vapor production with both vape juice and nic salts.
The one slight downside to this model is the loss of the vape juice window in the mouthpiece, but with the increased capacity, hopefully, you'll need to re-fill less frequently.
One of the biggest upgrades is the addition of the IQ-N chip making it a smarter device and with the increased battery size, the Nord 2 should last users the day after a full charge. The coil resistance is automatically detected by the advanced chipset which adjusts the settings accordingly so you don't have to. The Chipset also protects against short circuits, low voltage and features an 8-second safety cutoff.